REMA PRODUCTS - Conveyor Belt Hot Splicing Material

 

  

   

       
 

 

  

High Temperature Conveyor Belt Splicing Products
REMA Vulcanizers

REMA Temperature Measurement
REMA Tip Top High Temperature Conveyor Belt Splicing Material is carefully compounded using a special adhesion promoting coagent and peroxide curing system.

This compounding system allows our High Temperature Splicing Material to provide exceptional performance on High Temperature Conveyor Belting.

The REMA Tip Top #50 Solvent is the recommended solvent for this splicing system.

REMA Tip Top High Temperature Conveyor Belt Splicing Material can be cured at 320 Deg F using the EPDM cure time chart or at 300 Deg F by doubling the curing time on the EPDM cure time chart.

The REMA Tip Top High Temperature Splicing Material has a shelf life of 6 months at 70 Deg F and can be used for up to 12 months if stored at 50 Deg F.
USA Part Number USA Product Name Poly Color Code
HTHS-TG-03X20 High Temperature (EPDM) Fabric Belt Tie Gum - .030 x 20” x 36’ Bright Red
HS-BBF-022 Un-Skimmed Breaker Fabric - .022 x 6" x 50' Clear
HTHS-CS-1/16X20 High Temperature (EPDM) Fabric Belt Cover Stock - 1/16” x 20” x 36' Bright Red
HTHS-CS-1/8X20 High Temperature (EPDM) Fabric Belt Cover Stock - 1/8” x 20” x 36' Bright Red
HTHS-CS-3/16X20 High Temperature (EPDM) Fabric Belt Cover Stock - 3/16” x 20” x 36' Bright Red
HTHS-CEM-QT High Temperature Conveyor Belt Splicing Cement - Flammable (Quart) - MSDS Online  
HTHS-CEM-GAL High Temperature Conveyor Belt Splicing Cement - Flammable (Gallon) - MSDS Online  
HS-RP REMA Brown Coated Release Paper 76" x 100'  
   
Copyright (c) 2002 REMA TIP TOP, Inc. All Rights Reserved
Send Mail to our Web Administrator with questions or comments about this web site.
Last Modified: 10/19/2000 05:03:55 PM